Environmental experimental requirements and experimental methods for electronic organs 電子琴的環境試驗要求和試驗方法
Petri dishes are manufactured in various sizes to meet different experimental requirements 制造出不同大小的培養皿,適用于不同的實驗需求。
8 . the temperature autocontrol system of middle-temperature resistance furnace was designed and assembled, which meet experimental requirements 自行設計和組裝的中溫電阻爐溫度自動控制系統滿足設計要求,運行效果良好。
The beam-splitter comprises three pairs of fully reflecting planar mirrors and partially reflecting planar mirrors . according to the workspace size and experimental requirement, they were placed with a distance of 195-cm between two mirrors 空間分光延時系統由三對全反鏡和部分反射鏡構成,根據實驗平臺大小和實際需要調整鏡片之間的距離,使相鄰光束之間的光程差為390cm。
It improves anti-interference capacity and control precision of the system, it is able to complete automatically " test of all kinds of curves of temperature and humidity by program controlling, and meets experimental requirement 試驗結果表明,本論文所采用的控制策略使環境模擬控制系統具有較好的抗干擾性及精度高,該系統能夠全自動程序控制進行各種溫、濕度曲線試驗,滿足使用要求。
So the flow field visualization in intake duct was realized . according to the experimental requirements, tow different transparent intake duct model were designed . a real-time holographic interferometry measuring system was developed, in which he-ne laser was used as light source, and a ccd ( charge coupled device ) video camera was used to grab the interferogram . a intake simulation system was build-up 本文根據研究要求,用甲基丙烯酸甲酯制作了兩種不同類型的進氣道透明模型;設計并建立了利用he-ne激光器做光源的實時全息干涉測量光學系統;設計了一套能夠模擬進氣道在某一氣門升程時的進氣系統,用mtv-1802cbccd攝像機對干涉條紋進行了實時采集。
As to the experimental study, a test system was designed firstly, which include propellant feed system, cooling system, controlling system and measure system . secondly, a test engine was designed according to the experimental requirement . on this basis, experiments under different working conditions were done, and the results of them were analyzed, which showed the combustion efficiency and stability 實驗方面,首先設計了針對三組元發動機推力室工作過程進行試驗的試驗系統,包括推進劑供應系統與冷卻水供應系統、控制系統以及壓力、溫度、流量的測量采集系統;其次,設計出符合試驗要求的縮尺發動機;最后針對所設計的試驗系統和發動機,進行了不同工況的試驗,對所得數據進行了分析處理,得到了不同工況下燃燒效率和燃燒穩定性特性。